Not a Problem
Cut-off texts and model, incomplete and strange display of information
Hello,
I have opened the above model in the latest version of bizagi on several computers (~10) on about half of them the model comes out looking fine and dandy, on the other half the model looks good but any text larger than the box gets cut off. It is not just exports it is the actual model in bizagi as well.
All machines are similiar , win7 64 bit latest version of bizagi.
We are working on a project where bizagi modeler was used to create dozens of models and half of us cannot get much use out the models as we spend most of our time clicking on icons and making them larger so we can read the text rather than understanding the models.
Any help or suggestions would be great.
Thanks
John Dornisch
Dear Users,
According to this detail, we inform you that reason causing these strange type of issues, is having the display configuration in a machine, set to a larger value than 100%.
To solve this issue, ensure your display settings are adjusted to the 100% settings:
Thanks You
Yes that was the case.
Once I set this 100% all worked as expected.
Thanks again.
John Dornisch
Dear Users,
According to this detail, we inform you that reason causing these strange type of issues, is having the display configuration in a machine, set to a larger value than 100%.
To solve this issue, ensure your display settings are adjusted to the 100% settings:
Hi there,
I'm afraid it's a problem. My Bizagi doesn't show diagrams properly. Models that were created on other computers look inproperly on mine. Eg. text in tasks is cut off and text that refers to gateway is far away from the place it should be and often cover a gateway.
Zoom is set up on 100%.
What is more:
Bizagi version is: 2305OS: win7 x64MS .NET 4.0
Thanks for your support :)
Dear Przemek,
Please review the display settings at your machine (not in Bizagi Process Modeler).
To do this, go to your machine's Control Panel and into the Display settings.
Make sure your display is set to 100%:
Best regards,
Comments have been locked on this page!